Océ imagePRESS C7010VPS series Technical Manual page 318

SRA IPDS settings
PDF specific settings
PDF "all" to black
PDF enable cache
PDF overprint simulation
• PDF "all" to black
With this setting, the APPE can be forced to rip the colour "all" to only 100% black, instead of
100% of each of the four colours.
• PDF enable cache
The APPE can use a caching mechanism to automatically identify and store ripped objects
which are used more than once in the job. Usually this will improve the rip performance with
PDF data. However, there are a few jobs which will run a bit slower with the caching
mechanism. The user therefore has the choice through the setup if he wants to use the PDF
cache or not.
• PDF overprint simulation
PDF overprint simulation can be enabled to ensure correct printing of overprinted areas.
Colour management must be switched off to print overprints correctly. For example: set the
input profile to none.
IPDS tray-to-tray mapping
Logical tray for <tray name>
NOTE
For all supported physical
input trays of the product
type. Default values are
specified in the tray-to-tray
section.
IPDS tray to media for tray x
Media attributes
Feed direction for media
Colour names and numbers - (C, M,
Y, K) colour station
Colour number
318 Chapter 14 - SRA IPDS
Range
Yes, No (default)
Yes, No (default)
Yes (default), No
1 – 16
NOTE
Each logical tray must have a unique value.
From media catalogue
NOTE
Each media attribute must be unique.
SEF, LEF (default)
Range
One number for each of the four stations (C, M, Y, K).
Range 1..254.
Not valid for the K station. Zero is reserved for K station
and is not editable.
NOTE
Use for HLC.
imagePRESS C7010VPS series v2.2
4