Scheduled Jobs Queue - Océ imagePRESS C7010VPS series Technical Manual

Scheduled jobs queue

Scheduled jobs queue
Job stages
Print jobs that are sent to the 'Scheduled jobs queue' are printed automatically. The 'Scheduled
jobs queue' can hold jobs in various stages of their life cycle. The initial order in the 'Scheduled
jobs queue' is (when only prints to the 'Scheduled jobs queue' are made):
• Printing jobs (0 or 1)
• Ripped jobs (0 or more)
• Ripping jobs (0 or 1)
• Spooled/spooling jobs (0 or more)
You can use the Settings Editor to select the print workflow mode for each connection protocol
separately.
Receive-then-Print-while-RIP
In the Receive-then-Print-while-RIP mode the ripping job is present at the top of the 'Scheduled
jobs queue', printing for that job will start in parallel with ripping. This is detailed in the figure
below. The bold text in the figure below indicates the differences with the figure in the
Introduction on page
Spooling Spooled
Start Stop
Spool Spool
[3] Time line for job stage transitions for Print-while-rip model
NOTE
Ripping in the Receive-then-Print-while-RIP mode will only start when the whole job is received.
Streaming
To be capable of printing extremely large print jobs in a productive way, the print path in the
Controller is tuned to support streaming behaviour:
• RIP while Receive, so that ripping can start before the whole job is received.
• Job(s) are accepted and spooled (independent of used protocol).
• Limited number (max 2000) of pages are ripped ahead.
For streaming jobs internal data is cleaned-up while printing. Therefore only one copy-set will be
printed. The production of multiple copies of a same (digital) original is therefore the
responsibility of the sending host or server. To delete a printing, streaming job, it must be
stopped on sheet boundary first. The attributes of a streaming job cannot be edited.
If on the imagePRESS C7010VPS series the history is enabled, streaming jobs end up in the
History queue. However, the streaming job cannot be copied to the 'Waiting jobs queue' for re-
print.
18 Chapter 2 - PRISMAsync
17.
Print-while-rip
Ripping
Start
Ripped
Separate
RIP
first
first sheet
sheet
Printing Printed
Separate Delivered
Ripped
last sheet job
last
sheet
imagePRESS C7010VPS series v2.2