Viewing Lamp Strikes (L/St); Resetting Lamp Hours (L/Rs); Monitoring The Fan Speed (Fan) - High End Systems Cyberlight 2.0 User Manual

Viewing Lamp Strikes (L/ST)

To view the number of times the ignitor has attempted to strike the lamp:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the INFO field and press <ENTER>.
3. Using the up and down buttons, scroll to the L/ST field and press <ENTER>. The fixture will
display the number of times the lamp has attempted to strike.
Notes: Lamp strikes are automatically reset when the lamp hours are reset.
See "Resetting Lamp Hours" on page 3-6. If the display indicates
OVER, the counter has rolled over 9999 lamp strikes and must be
manually reset.

Resetting Lamp Hours (L/RS)

To reset lamp hours:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the INFO field and press <ENTER>.
3. Using the up and down buttons, scroll to the L/RS field and hold <ENTER> until the fixture
resets the lamp hours to 0000.

Monitoring the Fan Speed (FAN)

To monitor the lamp power supply fan speed:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the INFO field and press <ENTER>.
3. Using the up and down buttons, scroll to the FAN field and hold <ENTER>.
4. Using the up and down buttons, scroll to the LMP1 and to LMP2 to view the rotations per
second of each of the lamp power supply fans.
Cyberlight 2.0 User Manual
®
CHAPTER 3
The Menu System
27