Table of Contents
Advertisement
Chapter 3
The Menu System
You can use the fixture's onboard menu system to configure and test the
Cyberlight 2.0 fixture.
The onboard Cyberlight 2.0 menu system allows you to:
• Assign a DMX start channel.
• Access fixture options such as homing the fixture, viewing fixture status, and performing
self tests.
• View all DMX values on the link.
• Identify fixture errors.
Navigating the Menu System
After homing, The alphanumeric screen will display HES, CYBR, The model (2000 or 1500
depending on the power setting) the software version in the form V Major.minor (V1.1 for
example), and the DMX address in the C### format.
You can access and navigate the
menu system via the four menu
navigation buttons on the fixture's
front panel.
The alphanumeric LED display
shows the menu items you select
from the menu map. When acces-
sing fixture options, the display will
flash when a new option is selected
(by pressing the <Up> or <Down>
arrow buttons), and stops flashing
when a new option is stored (by
pressing the <Enter> button).
To access the menu system: press and hold the <Menu> button until AddR appears on the
display. The menu system is protected against inadvertent menu changes by requiring the
<Menu> button to be held for a few seconds before allowing entry to the menu system.
To return to the previous option or menu without changing the value: press the
<Menu> button.
Cyberlight
2.0 User Manual
®
Use the <Enter> button to select
and store a menu or option
Use the <Menu> button to
access the menu and return
to previous menu or option
Use <UP> and
<Down> arrow
buttons to scroll
through menus
and options
15
Advertisement
Table of Contents
