Table of Contents
Advertisement
CHAPTER 4
Fixture Programming
Static Color Wheel
Static Color Position
This parameter lets you select one of six dichroic colors, or an CTO adjustment litho on the
Static Color Wheel.
Note: The CTO color correction dichroic filter is salmon-colored and can be
used to color-correct the Cyberlight 2.0 to a 2950° K (tungsten) color
temperature to match tungsten-filament lighting fixtures
Position Description
1
Open
2
Red
3
Purple
4
CTO
5
Aqua
6
Dark Blue
7
Dark Orange
8
Indigo
Static Color Function
This parameter provides options for how you control the color selection:
Static Color Function
Indexed
Forward Spin
Reverse Spin
Slow Scan
Fast Scan
Random
Blink
You can select either full speed or MSpeed (MSpeed control of the wheel motor) mode to control
the motor speed of the function you choose. For more information on MSpeed, See MSpeed
(Motor Speed) on page 38.
32
4
3
2
Takes the quickest path and snaps to the chosen color on the wheel.
Spins the wheel forward through the colors at variable speeds.
Spins the wheel in reverse through the colors at variable speeds.
Performs a scan of one static color position from each side at a slow rate
Performs a scan of one static color position from each side at a fast rate
Selects random static color positions at variable speeds.
Closes and opens the shutter between indexed static color changes.
.
5
6
7
8
1
Description
Cyberlight
2.0 User Manual
®
Advertisement
Table of Contents
