Table of Contents
Advertisement
CHAPTER 3
The Menu System
Information Menu (INFO)
The Information menu allows you to view current fixture information such as internal
temperature, fixture hours, software version, and DMX data for any other device on the link.
Viewing the Current Software Version (VER)
To view the current software version:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the VER option.
4. Press <Enter>. The LED will display the fixture's current software version.
Viewing the Unique Fixture ID (UNIQ)
To view the fixture's identification number:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the INFO menu. Press <Enter> to select.
3. Scroll to the UNIQ option.
4. Press <Enter>. The LED will display the fixture's unique ID number.
Note: This option also contains the commands for setting the ID number for
the first time at the factory. In that case UP and DOWN will be
displayed as the number is generated .
Monitoring Internal Fixture Temperature (TEMP)
The Cyberlight 2.0 menu system lets you monitor the internal fixture temperature at the CPU
board and the lamp power supply. You can view the current, maximum and minimum
temperatures at each of these points or reset the maximum and minimum temperature readings
to the current temperature.
To view the fixture's current internal temperature:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the INFO field and press <ENTER>.
3. Using the up and down buttons, scroll to the TEMP field and press <ENTER>.
4. Using the up and down buttons, scroll to the CURR field and press <ENTER>.
The fixture will display the current internal temperature followed by C (degrees centigrade)
for the CPU and the LPS locations.
24
Cyberlight
2.0 User Manual
®
Advertisement
Table of Contents
