Static Gobo Wheel; Static Gobo Position; Static Gobo Function - High End Systems Cyberlight 2.0 User Manual

Static Gobo Wheel

Static Gobo Position

This parameter lets you select from seven factory provided litho patterns on the Static Gobo
.
Wheel
Position Description
1 Open
2 Leaves
3 Dots
4 Abyss
5 Tunnel
6 Sharp Burst
7 Lapse

Static Gobo Function

This parameter provides options for how you control the wheel and gobo selection on the Static
Gobo Wheel.
Static Gobo Function
Indexed
Forward Spin
Reverse Spin
Slow Scan
Fast Scan
Random
Blink
You can select either full speed or MSpeed (MSpeed control of the wheel motor) mode to control
the motor speed of the function you choose. For more information on MSpeed, See MSpeed
(Motor Speed) on page 38.
Cyberlight 2.0 User Manual
®
4
3
2
Takes the quickest path and snaps to the chosen gobo position on the wheel.
Spins the wheel forward through the gobo positions at variable speeds.
Spins the wheel in reverse through the gobo positions at variable speeds.
Performs a scan of one gobo position from each side at a slow rate
Performs a scan of one gobo position from each side at a fast rate
Selects random gobo positions at variable speeds.
Closes and opens the shutter between indexed gobo position changes.
5
6
8
1
Description
CHAPTER 4
Fixture Programming
7
33