High End Systems Cyberlight 2.0 User Manual page 29

Level 1 Level 2
TEST S/UP
VER
UNIQ
TEMP
F/HR
INFO
DMX
L/HR
L/ST
L/RS
FAN
M/VR
Cyberlight 2.0 User Manual
®
Level 3 Level 4
OFF
ON
####
########
CPU ####
CURR
LPS ####
CPU ####
MAX
LPS ####
CPU ####
MIN
LPS ####
HOLD
RST YES
DONE
####
1-512 ####
####
####
NO
YES DONE
LMP1 ####
LMP2 ####
P/T ####
Z/FC ####
FR/C ####
M/Y ####
C/L1 ####
LAMP ####
FAN ####
DISP ####
Level 5
Setup mode for mechanical homing
Shows the
Shows the fixture's unique ID number
Shows the current internal temperature at the logic
board
Shows the current internal temperature at the
lamp power supply
Shows the maximum internal temperature
recorded at the logic board
Shows the maximum internal temperature
recorded at the lamp power supply
Shows the minimum internal temperature
recorded at the logic board
Shows the internal temperature recorded at the
lamp power supply
When you select Yes the Max and Min
temperature readings reset to the current. DONE
will display when the process is complete.
Shows current number of fixture hours
Shows the DMX data for the selected DMX
channel on the link.
Shows Lamp hours
Shows the current number of Lamp strikes
When you select Yes the Lamp hours are reset to
zero. DONE will display when the process is
complete.
Shows the rotations per second of the two fans
located in the lamp power supply compartment
Shows Pan and Tilt HW.SW version
Shows Zoom and Focus lenses HW.SW version
Shows Frost and Cyan flags HW.SW version
Shows Magenta and Yellow flags HW.SW version
Shows Color and Rotating Gobo Wheel HW.SW
version
Shows Lamp HW.SW version
Shows Fan HW.SW version
Shows LED display HW.SW version
CHAPTER 3
The Menu System
Description
17