Control Settings - High End Systems Cyberlight 2.0 User Manual

Control Settings

The Control parameter activates certain Fixture functions. To access all Cyberlight 2.0 Control
settings (except for Pan & Tilt MSpeed Off), first select a control channel value, then set the
Shutter channel to "0."
NOTE: The Control channel should not be crossfaded.
Control Setting
Safe
Pan & Tilt
MSpeed Off
Display Off
Display On
Home All
Lamp On
Lamp Off
Shutdown
Cyberlight 2.0 User Manual
®
Disables all Control settings for normal operation.
Sets Pan & Tilt MSpeed to ignore MSpeed settings.
Sets display to off.
Turns on the display.
Remotely homes the fixture.
Remotely restrikes the fixture's lamp.
Remotely extinguishes the fixture's lamp.
Remotely deactivates the fixture.
Description
Set Shutter parameter = 0 to
access these control options
CHAPTER 4
Fixture Programming
39