Test Menu (Test); Homing The Fixture (Home); Lamp Test (Lamp); Changing Boot Codes (Boot) - High End Systems Cyberlight 2.0 User Manual

CHAPTER 3
The Menu System

Test Menu (TEST)

The Test menu allows you to manually home the fixture and perform fixture self tests to
determine the origin of mechanical problems.

Homing the Fixture (HOME)

This menu item allows you to manually home the fixture. To remotely home the fixture using a
DMX console, see Control Settings on page 39. To manually home the fixture:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select.
3. Scroll to the HOME option (this will be the first option displayed).
4. Press <Enter> to store.

Lamp Test (LAMP)

The Lamp Test menu gives the user the options of manually striking the lamp or turning it off.To
access the lamp function:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the TEST field and press <ENTER> to select.
3. Using the up and down buttons, scroll to the LAMP field and press <ENTER>.
4. Using the up and down buttons, scroll to ON to strike the lamp or OFF to extinguish the
lamp.
5. Press <Enter> to store.

Changing Boot Codes (BOOT)

When the Cyberlight 2.0 fixture is uploaded, occasionally it is necessary to include a new boot
code with the latest software. This is apparent when bOOT dIff appears in the display. To accept
and store the new boot code:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the TEST field and press <ENTER>.
3. Using the up and down buttons, scroll to the bOOT field and press <ENTER>. The fixture
will display dONE, RST, and home.
Caution: Do not remove power from the fixture during the
22
above procedure.
Cyberlight 2.0 User Manual
®