Table of Contents
Advertisement
Appendix B:
Important Safety Information
WARNING: For Continued Protection Against Fire
1. This equipment is designed for use with Philips type MSR 200 watt SA lamp only. Use of any
other type lamp may be hazardous and will void the warranty.
2. Do not mount on a flammable surface.
3. Maintain minimum distance of 1.0 meter (3.28 feet) from combustible materials.
4. Replace fuses only with the specified type and rating.
5. Observe minimum distance to lighted objects of 3.0 meter (9.84 feet).
6. This equipment for connection to branch circuit having a maximum overload protection of
20 A.
WARNING: For Continued Protection Against Electric Shock
1. If this equipment was received without a line cord plug, attach the appropriate line cord
plug according to the following code:
• Brown–live
• Blue–neutral
• Green/yellow–earth
Note (For UK only): As the colours of the cores in the mains lead of this equipment may
not correspond with the coloured markings identifying the terminals in your plug, proceed as
follows:
• the core which is coloured green and yellow must be connected to the terminal in the plug
which is marked with the letter "E" or by the earth symbol
and yellow.
• the core which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black.
• the core which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.This equipment must be earthed.
2. Disconnect power before re-lamping or servicing.
3. Equipment suitable for dry locations only. Do not expose this equipment to rain or moisture.
4. Refer servicing to qualified personnel.
5. Class I equipment - this fixture employs a grounded type receptacle and is not intended for
connection to a two wire, ungrounded source of supply.
Cyberlight
®
2.0 User Manual
, or coloured green or green
43
Advertisement
Table of Contents
