Appendix B
Important Safety Information
WARNING: For Protection Against Exposure To Excessive Ultraviolet (UV) Radiation
1. Do not operate this equipment without complete lamp enclosure in place or if shields,
lenses, or ultraviolet screens are damaged.
2. Change shields, lenses, or ultraviolet screens if they have become visibly damaged to such
an extent that their effectiveness is impaired; for example, by cracks or deep scratches.
3. Never look directly at the lamp while lamp is on.
WARNING: For Continued Protection Against Injury To Persons
1. Use secondary safety cable when mounting this fixture.
2. CAUTION: Hot lamp may be an explosion hazard. Do not open for 5 minutes after switching
off wear eye and hand protection when re-lamping.
3. Equipment surfaces may reach temperatures up to 110° C (230° F). Allow 10 minutes for
cooling before handling.
4. Change the lamp if it becomes damaged or thermally deformed.
44
Cyberlight
®
2.0 User Manual