HP J3100B Installation And Configuration Manual page 110

Advanced Concepts
Filters and Security
6.
Figure 7-7. Example of Specifying Filter Actions for Individual Ports
7-12
Filter Type Option Next Line for Filter
Selected in Step 4 Type Option
Multicast Multicast Address Type in the multicast address.
Protocol Frame Type
Source Port Source Port
Source MAC Source Port and
Source MAC
(address)
Configure the filter action for each destination port. For example:
Action for Selected Filter Option
Use the Space bar to select the frame
type.
Use the Space bar to select the source
port.
a. Use the Space bar to select
the source port.
Press [>] to highlight the
b.
Source MAC parameter.
c. Type the MAC address of
the source device whose
packets you want to filter.
a "Source Port " filter type has been
selected for port D1
A Drop action has been specified for ports B2 and
B3. Thus, traffic from port D1 will not be forwarded
by ports B2 and B3.