Console Features - HP J3100B Installation And Configuration Manual

Configuring the Switch
Configurable Features

Console Features

Lets you enable or disable inbound Telnet access and control the types of
events displayed in the event log. Also specifies the terminal type and the
console screen refresh interval used by the statistics screens (that is, the
frequency with which statistics are updated on the statistics screens).
N o t e
"Inbound" Telnet is Telnet access to the switch console from another device.
"Outbound" Telnet, which is using Telnet through the switch console to access
another device, is always enabled as long as the switch has been configured
with a valid IP address. (To configure an IP address for the switch, refer to
"Internet (IP) Service Features" on page 3-9.) The switch supports one
inbound and one outbound Telnet session simultaneously.
Figure 3-12. The Console Configuration Screen (Default Values)
3-16
Default Inbound
Telnet Setting