HP J3100B Installation And Configuration Manual page 98

Using the Advanced Commands
Commands
Command Syntax
zput file remote-file overwrite dos/unix
where:
file is CONFIG or a command.
remote-file is a file name on the
console PC.
overwrite is:
0 (don't overwrite a file of the
same name).
1 (create or overwrite a file of
the same name).
dos = 0 (specifies DOS format)
unix = 1 (specifies unix format)
Version
log [-a] ' [keywrd]
! [repetitions]
Repeat
Page
Print
Redo [?] / [number] / [string]
6-8
Description
Copies a switch configuration from the switch to the console PC. The PC must
be emulating a VT100 or ANSI terminal. Also, the PC must be running a
Zmodem-compatible terminal emulation program such as PROCOMM PLUS.
Displays the version of operating system (OS) software currently running in
the switch. If an FDDI Module is installed, also displays the current version of
the FDDI Module OS.
Displays the event log.
(Press the Space bar when prompted by the -- MORE -- message.)
Examples:
log Displays100 lines of the current event log, since the
last reboot.
log -a Displays the entire event log.
log -a 'telnet Displays all event log lines containing the keyword "telnet"
log 'telnet Displays any event log lines, since the last reboot, of the
current log that contain the keyword "telnet".
Repeat the last command.
Examples:
! Repeats the last command once.
! 3 Repeats the last command three times.
Continuously repeats the last command until a key is pressed on the console.
Toggles paging mode for display commands.
Send the output of a Command Prompt command to a printer or to a file.
Display or redo a command from the command history.
Examples:
Redo Re-executes the most recent command.
Redo ? Causes the last ten commands to be listed.
Redo n Re-executes the previous n th command (1-10).
Redo string Re-executes a previous command that begins with the text
string .