Complete The Network Connections To The Switch - HP J3100B Installation And Configuration Manual

Installing the Switch

5. Complete the Network Connections to the Switch

5. Complete the Network Connections
Reconnect the switch to the power source. With the switch mounted, you are
now ready to connect it to your network. Typical switch connections are:
N o t e
For important information on connecting the Switch 2000 to other devices,
refer to the Connectivity Quick Reference that is shipped with the optional
HP AdvanceStack Switch 2000 modules and is also available on the "HP
AdvanceStack Product CD" shipped with your switch.
For other network design guidelines, refer to An Introduction to Ethernet
LAN Switches and Designing Switched Networks, both of which are included
on the HP AdvanceStack Product CD shipped with the Switch 2000. For
physical topology guidelines, refer to Designing HP AdvanceStack Work-
group Networks, available from HP authorized LAN dealers and also on the
product CD shipped with your Switch 2000.
Network connections to the Switch 2000 are through ports on the optional
modules and transceivers installed in the switch. For connections to these
ports, see the documentation you received with the specific module or
transceiver, and to the Quick Reference mentioned in the above note.
1-12
to the Switch
Switch-to-networked devices (i.e. computers, servers, and printers).
Switch-to-hub
Switch-to-switch
Switch-to-router
Switch-to-network backbones