HP J3100B Installation And Configuration Manual page 132

Advanced Concepts
Automatic Broadcast Control (ABC)
To Configure ABC. Use this procedure to configure or edit the ABC settings
for a switch or VLAN.
1.
Figure 7-18. The Configuration Menu
2.
3.
N o t e
The rest of this procedure assumes that VLANs are not configured. If you have
VLANs configured on your switch, you can still use this procedure. The screen
layout will be different than shown here, but the parameters are the same.
4.
7-34
Beginning at the Main Menu, select Configuration to display the
Configuration menu.
ABC Option
Select Automatic Broadcast Control (ABC) and press [Enter].
If no VLANs are configured, go to step 4 . If VLANs are configured, press
Edit, then select the VLAN in which you want to configure ABC.
Press [E] (for Edit).