HP J3100B Installation And Configuration Manual page 117

3.
4.
5.
6.
7.
N o t e
You can rename "DEFAULT_VLAN", but you cannot delete it from the Switch,
regardless of which name you assign to it.
To Move a Port to a VLAN. Use this procedure to move a port into a VLAN.
(Ports you do not specifically assign to a VLAN are automatically placed in
the default VLAN.)
1.
2.
3.
Press [A] (for Add). You will then be prompted for a new VLAN name:
Name : _
Type the name (up to 12 characters, with no spaces) of a new VLAN that
you want to add, then press [Enter].
Press [S] (for Save).
Do one of the following:
• If you want to add another VLAN name, return to step 3.
If you are finished entering VLAN names, press [B] (for Back) to
•
return to the Configuration menu.
Return to the Main Menu and reboot the switch to activate the new
VLAN(s) you have just entered.
If you have just added a new VLAN name and have not yet rebooted the
switch, do so now (step 7 in the previous procedure).
Return to the Main Menu and select Configuration to display the Config-
uration menu.
Select Port VLAN Assignment . You will then see a Port VLAN
Assignment screen similar to the following:
Advanced Concepts
Virtual LANs (VLANs)
7-19