HP J3100B Installation And Configuration Manual page 133

Table of Contents

Advertisement

Figure 7-19. The Default ABC Screen (No VLANs Configured)
5.
Use the Space bar to enable ABC. Select one of these options:
IP_IPX: Enables ABC for both the IP and IPX protocols.
IP: Enables ABC only for the IP protocol.
IPX: Enables ABC only for the IPX protocol.
Disabled
6.
If you want broadcast control disabled for IP RIP and/or IPX RIP and SAP
broadcasts, leave the remaining parameters set to No and go to step 7.
If you do want broadcast control for RIP or SAP broadcasts, press an
arrow key to display the remaining ABC parameters. (If VLANs are
configured, these parameters already appear.) Then do one of the follow-
ing:
Advanced Concepts
Automatic Broadcast Control (ABC)
Note: This is the screen
layout when no VLANs are
configured. The screen has
a different appearance if
VLANs are configured.
7-35

Advertisement

Table of Contents
loading

Table of Contents