Magnum Energy ME-RC Owner's Manual page 19

FEATURES/SETTINGS
Main Menu
Menu Heading/Item
07 Power
Save
08 Screen
Setup
Brightness=
09 Final
Charge
10 Pwr Up
Always
01 Tem-
peratures
02 Revi-
sions
03 Inv-
Model
04 Load
Defaults in x.xs
Defaults
VAC Dropout:
05 Ext
Charge Rate:
Control
Shore Max:
06 Set
PIN
* 12-volt values shown; for 24v – multiply x2; for 48v – multiply x 4.
** These settings return to factory default when power to remote is removed.
ME-RC Compatibility Matrix Notes:
[1] Not available on MM/MM-E/MM-AE/MMS/MMS-E models.
[2] AC Couple mode can be activated using Battery Type: Custom, only with
MS-PAE Series Rev 4.1 or MS/MS-PE Series
[3] The AC amps displays are not shown unless connected to MS-PAE, MS-PE
or MSH Series models.
[4] Level 2 and 3 inverters can be used, but Level 2 inverters are limited
from 1.0 hour to 4.5 hours, Level 3 inverters <Rev 4.1 are limited from 1.0
to 6.5 hours; and Level 3 inverters
from 1.5 to 6.5 hours; any setting outside these limited ranges are not
recognized and reverts to the inverter's default absorption time (2.0 hours).
[5] BM/SOC features require the ME-BMK (Battery Monitor Kit) to be installed.
©2013 Magnum Energy, Inc.
Selections/
Adjustments Range
PwrSave= OFF, 1 - 60 Minutes
Contrast=
0 - 100%
Multi, Float, Silent
Final=
Rebulk =
Silent
(12.0-16.0V)*
Pwr Up= YES, NO
BTS:
Tfmr:
Read only displays
FETs:
AGS:
Inverter:
Remote:
AGS: Read only displays
BMK:
Router:
Model: Read only display
Press SELECT (x5 secs)
for default settings
Read only display
("INT" or "EXT")
Locked, Unlocked,
SETUP=
Change PIN (PIN= 0000)
Rev. 4.1 (and MMS Rev 1.5) are limited
3.0 Setup
Model/
Default
Level
Setting
Required
Level 1
100%**
Level 1
50%**
Level 4
Level 1
Level 1
Level 1
Level 1
Level 1
Level 1
Level 1 Unlocked
5.0.
15min
Multi
12.0V
NO
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
12