Menus; Menu Operations - Sony RCP-1500 Operation Manual

Menus

Menu Operations

You can use various operation menus to adjust system
devices and perform other operations with the control panel.
RCP-1500/1501
2
Category Select
Func-
Scene
tion
Config File
Paint
4
RCP-1530
Category Select
Func-
Scene
tion
Config File
Paint
4
1
Press the MENU button.
The Category Select screen appears.
2
Press a button on the Category Select screen to
select a menu.
[Scene]
: Scene Menu (page 78)
[Function]
: Function Menu (page 77)
[Multi]
: Multi Menu (page 77)
[Config]
: Config Menu (page 71)
[Maintenance]
: Maintenance Menu (page 64)
[File]
: File Menu (page 63)
[Paint]
: Paint Menu (page 54)
When you select a menu, the corresponding setting and
adjustment screen for the menu appears.
3
Exit
Multi
1
Mainten-
ance
1 3
Exit
Multi
2
Mainten-
ance
3
Select the item to operate.
• For a menu (Paint menu, etc.) consisting of multiple
pages, turn the SELECT knob to select an item and
then press the SELECT knob to display the setting and
adjustment screen for that item. Turning the SELECT
knob after the setting and adjustment screen is displays
allows you to switch to another item.
• When tabs are displayed in the setting and adjustment
screen, press a tab to switch to the setting item.
4
Set or adjust the item.
• Turn the adjustment knob (or press the button) in
accordance with the setting and adjustment item
(parameter) to adjust the setting value (select a setting).
• When a message screen appears, perform the
operation in accordance with the message, and then
[OK]
press .
When the setting or adjustment is finished
• To adjust another item of the same menu, turn the SELECT
knob to switch to the setting and adjustment screen for that
item.
• To adjust a different menu, press
Category Select screen, and then select another menu.
[Exit]
• To close the menu, press
screen.
To display the RCP screen
When setting the control panel, use the following procedure to
display the RCP screen.
1
Press the MENU button.
The Category Select screen appears.
Category Select
Func-
Scene
tion
Config
Paint
2
[Config]
Press .
The Config screen appears.
Config
[Exit]
to return to the
in the Category Select
Exit
Multi
Mainten-
File
ance
Exit
RCP
Menus
51