Sony RCP-1500 Operation Manual page 23

d Camera number/tally display window
This window displays an amber number for the camera
controlled by the control panel.
When a red tally signal is sent to the camera, a black number
is displayed and the background of the number lights in red.
When a green tally signal is sent to the camera, a black
number is displayed and the background of the number lights
in green.
When both red and green tally signals are simultaneously
sent, the left half of the background lights in red, and the right
half lights in green.
e SENS (iris adjustment range) knob
This knob is for manually adjusting the iris in absolute value
mode. It does not work in relative value mode.
f COARSE (iris coarse adjustment) knob
This knob is for manually adjusting the iris.
Also see the table "Iris Adjustment Functions", (page 23).
g Master black display window
This window displays the master black setting value.
h IRIS display window
This window displays the iris setting as an F number. If the lens
is closed, "CLS" is displayed.
IRIS knob
COARSE knob
SENS knob
Iris Adjustment Functions
Relative value mode
(IRIS RELATIVE button lit)
Adjusts the iris in relative values.
A variable amount can be set. (See page 39)
Adjusts the iris in relative values within the full range
from OPEN to CLOSE.
Does not function.
i MASTER BLACK knob
This knob is for manually adjusting the master black. The
setting value is displayed in the master black display window.
j EXT (lens extender) indicators
EXT: Lights when the lens extender is used.
D EXT: Lights when the digital extender function is turned ON.
k IRIS knob
This knob is for manually adjusting the iris of the lens when the
AUTO button is not lit. When the AUTO IRIS button is lit, you
can finely adjust the reference value for auto adjustment of the
iris.
Also see the table "Iris Adjustment Functions", (page 23).
l Iris gauge
The white marker line on the gauge provides a click position
for the IRIS knob. If you turn the gauge to align the marker line
with the most frequently used iris position, it can be used as a
setting reference for the IRIS knob.
The gauge rotates 360, so set the marker line so that it is
outside the rotation range of the knob if you do not need a click
position.
Absolute value mode
(IRIS RELATIVE button not lit)
Adjusts the iris within the variable range set by the
SENS and COARSE knobs.
Sets the lower limit for the CLOSE side.
Sets the upper limit for OPEN, referenced to the
CLOSE value set by the COARSE knob.
Names and Functions of Parts
23