Saving And Initializing Settings; To Save Changed Setting Values To A "Memory Stick Duo - Sony RCP-1500 Operation Manual

9
Repeat steps 6 to 8 if you want to assign functions to
multiple buttons.
10
[Save]
Press .
The confirmation message screen appears.
11
[Save]
Press .
The function assignments of custom buttons are saved.
If you exit the menu without saving, the function
assignments will not be reflected.
Note
When you assign one of the following menus from the
paint menu to a custom button, the same menu must also
be registered in the custom paint menu. If you assign the
menu to a custom button without registering it in the
custom paint menu, pressing the custom button will not
access the assigned menu.
• Skin Detail
• Gain
• Gamma
• Black Gamma
• Knee
• Shutter
• Saturation
• Flicker Reduction
• White
• Black
• Flare
• Detail
• Matrix
• V Mod Saw
• White Clip
• Auto Iris
• Mono Color
• Noise Suppression
• Gamma/Knee
• Low Key Saturation
• Knee Saturation
• Gamma Table
• 3D Monitor

Saving and Initializing Settings

To save changed setting values to a "Memory
Stick Duo"
You can save the changed setting values of reference files and
scene files to a "Memory Stick Duo." You can use these files
when necessary by reading them from the "Memory Stick
Duo."
1
Insert a "Memory Stick Duo" into the "Memory Stick
Duo" slot. (page 79)
2
Enter engineer mode. (page 52)
3
Press the MENU button.
The menu closes and the control panel remains in
engineer mode.
4
Display the RCP Config screen.
RCP Config
Display
Customize
/Sound
Date
Network
/Time
5
[Backup]
Press .
The Backup screen appears.
Backup
Menu SW
Customize Customize
6
Select the settings to save.
[Menu Customize]
: Custom paint menu settings
[SW/VR Customize]
: Assignable button, custom button,
and assignable adjustment knob settings
[Network Config]
: Network settings
[Panel Config]
: RCP configuration menu settings other
than the above
Note
[Network Config]
Even if you select
IP menu (the IP address of the MCU, etc.) are not saved
or read.
Example: When Menu Customize is selected.
Menu Customize
Store Recall
No Date Time
1 09/10/10 14:30 RCP-1501
2 09/12/31 16:25 RCP-1501
Exit
VR
Mode
Setting
Infor-
Security
mation
Backup
Exit
Panel Network
Config Config
, settings in the TCP/
Exit
Delete
Enter
Settings
49