Sony RCP-1500 Operation Manual page 74

Menu Secondary
menu
LCD
EL
Touch Panel
Menu Item
Mode Screen Saver
PIX/WF
Matrix Gate
Extend Call
Preview
Status Display
VR Setting
Date/Time
Network Network Info
CNS
LAN I/F
TCP/IP
Information Version
Network Info
74
Menus
Submenu Switch Control
item
Bright
OFF
Light Detect
Detect
Touch Test
Sense
Option Function
Sets the screen saver to display on the LCD.
ON Enables the screen saver function.
Preview Displays a preview of the set screen saver.
Wait Time Sets the time from when the last operation was performed until when the
screen saver is displayed.
Type Selects the screen saver type.
Sets the operation for when PIX/WF output.
PIX/WF Syncro Links RGB selection in the menu and PIX/WF control for when Black Shading
and White Shading are adjusted (linked when ON). This can only be set when
in engineer mode.
PIX/WF Control Mode Sets the control mode of the monitor selection buttons. See "To set PIX/WF
operation" (page 44).
Gate Interlock When this is turned ON, priority is given to the setting of the control panel for
the selection of Multi Matrix Gate when the control panel disables Panel Active
or PARA, even if another panel has a different channel selected. This can only
be set when in engineer mode.
The TALLY indicator continues to flash for a while when a call is received.
ON Enables Extend Call.
Time Sets the flashing duration of the TALLY indicator.
Mode Sets the condition for enabling this function.
Specifies the output destination for previews. This can only be set when in
engineer mode.
Sets the Status screen display.
Status Display OFF Disables the Status screen display.
See "To change the sensitivity of the adjustment knobs" (page 39).
Date Sets the date.
Time Sets the time.
Time Zone Sets the time zone.
Displays the network information.
Legacy/Bridge/MCS Sets the CNS.
Negotiation Sets the negotiation operation.
LAN I/F OFF Turns OFF the LAN I/F.
Speed Sets the network line connection speed.
Duplex Sets the network line communication method.
IP Address Sets the IP address.
Subnet Mask Sets the subnet mask.
Default GW Sets the default gateway.
Displays the version information.
Displays the network information.
Description
Adjusts the LCD.
Adjusts the brightness of the LCD.
Adjusts the backlight for illuminating the function names.
Turns off the backlight.
Turns off the backlight in response to the surrounding brightness.
Sets the brightness for turning off the backlight.
Sets the touch sensor of the LCD.
Tests the response of the touch sensor.
Sets the sensitivity of the touch sensor.