Sony RCP-1500 Operation Manual page 38

RCP-1500/1501
Display/Sound
LCD
Clear
RCP-1530
Display/Sound
Clear
4
Turn the adjustment knobs to set the brightness of
the LCD.
The following setting can be configured.
Bright: Sets the brightness of the LCD.
To illuminate character display in dark places
You can set a slight light to be emitted from the characters on
the panel by the EL backlight. This setting makes the
characters easy to see in dark surroundings.
1
Display the RCP Config screen. (page 51)
RCP Config
Display
/Sound
Date
/Time
2
[Display/Sound]
Press
The Display/Sound screen appears.
38
Settings
3/5 Exit
Bright
50
3/5 Exit
LCD
Bright
50
Exit
Mode
Infor-
Security
mation
.
3
Turn the SELECT knob to select "EL."
The EL screen appears.
The EL screen can also be displayed after you press the
SELECT knob if you turn the SELECT knob to select "EL"
and then press the SELECT knob.
RCP-1500/1501
Display/Sound
1000H
EL
Clear
Light
Detect
Detect
50
RCP-1530
Display/Sound
1000H
EL
Clear
Light
Detect
Detect
50
4
Turn the adjustment knobs to change the setting.
The following settings can be configured.
Detect: Specifies the surrounding brightness at which to
turn OFF the EL backlight. If you press the
Detect]
button to light the button, the EL backlight
turns OFF automatically when the brightness of the
value that is specified here is detected.
To turn OFF the character light setting
[OFF]
Press to light the button.
4/5 Exit
OFF
4/5 Exit
OFF
[Light