Sony RCP-1500 Operation Manual page 50

7
[Store]
Press .
The screen changes as follows.
Menu Customize
Store Recall
No Date Time
1 09/10/10 14:30
2 09/12/31 16:25
Input file no :
RCP => MS
8
[File Number]
Press
knob to select the file number, and press
If you select the same number as that of a file displayed in
the list, the data is overwritten.
Menu Customize
Store Recall
No Date Time
1 09/10/10 14:30
2 09/12/31 16:25
RCP => MS
9
Confirm the file number, and press
The settings are saved to the "Memory Stick Duo."
To read settings saved to a "Memory Stick Duo."
Perform the procedure of "To save changed setting values to a
"Memory Stick Duo" (page 49)" up to step 5, and then press
[Recall]
in step 6. The subsequent operation is the same.
To delete settings saved to a "Memory Stick Duo."
Perform the procedure of "To save changed setting values to a
"Memory Stick Duo" (page 49)" up to step 5, and then press
[Delete]
in step 6. The subsequent operation is the same.
To initialize the settings
You can reset all of the RCP configuration menu settings to
their default settings.
1
Enter engineer mode. (page 52)
Security
Page Item
Permission Permission
ALL
Preset
2
[All Preset]
Press .
The confirmation message appears.
50
Settings
Exit
File
Delete
Number
RCP-1501
RCP-1501
Enter
3
or use the leftmost adjustment
[Enter]
Exit
Delete
RCP-1501
RCP-1501
Save OK?
Enter
3
[Enter]
.
Exit
Code
Change
Engeneer
Mode
3
[OK]
Press .
The RCP configuration menu settings are all reset to their
default settings.
.