Sony RCP-1500 Operation Manual page 69

Maintenance menu
Submenu
Menu Secondary
menu
2/3
3/3
SD Gamma
SD Matrix
User Matrix 1/2
User Matrix 2/2
Multi Matrix
Preset Matrix
Switch Control item
H/V Ratio
Frequency
Detail Comb
W Limiter
B Limiter
SD M
Gamma
OFF
ON
R-G
G-B
B-R
ON
R-B
G-R
B-G
ON
Phase
Hue
Saturation
All Clear
ON
Description
This is the second page of SD Detail adjustment.
Adjusts the horizontal and vertical ratio of contour correction.
Adjusts the center frequency of contour correction.
Reduces cross color noise by applying the comb filter to contour
correction signals. Adjusting this in the plus direction reduces
cross color noise, but resolution sensitivity deteriorates. This
can only be used when an SD camera is connected.
This is the third page of SD Detail adjustment.
This is the limiter correction for detail signals added in the white
direction.
This is the limiter correction for detail signals added in the black
direction.
This is the gamma correction for down converter output.
Adjusts SD gamma.
This is the linear matrix correction for down converter output.
Disables the SD matrix function. This switch enables the
function to be turned ON/OFF simultaneously in accordance
with individual matrix settings.
Sets the SD matrix correction factor individually. This is the first
page of User Matrix. When User Matrix is enabled, the ON mark
appears on the very left of the tab.
Enables the User Matrix function.
Corrects the signal of the R channel in accordance with the
difference between the signals of the R channel and G channel.
Corrects the signal of the G channel in accordance with the
difference between the signals of the G channel and B channel.
Corrects the signal of the B channel in accordance with the
difference between the signals of the B channel and R channel.
Sets the SD matrix correction factor individually. This is the
second page of User Matrix. When User Matrix is enabled, the
ON mark appears on the very left of the 1/2 tab.
Enables the User Matrix function. This is the same switch as
1/2.
Corrects the signal of the R channel in accordance with the
difference between the signals of the R channel and B channel.
Corrects the signal of the G channel in accordance with the
difference between the signals of the G channel and R channel.
Corrects the signal of the B channel in accordance with the
difference between the signals of the B channel and G channel.
If Multi Matrix which allows you to change the color reproduction
for each hue divided into 16 is enabled, the ON mark appears
on the very left of the tab.
Enables the SD Multi Matrix function.
Selects the hue to adjust.
Changes the hue of colors within the hue range selected with
Phase.
Changes the saturation of colors within the hue range selected
with Phase.
Returns the factors of all ranges of Multi Matrix to their initial
states.
Selects the matrix provided in advance. When Preset Matrix is
enabled, the ON mark appears on the very left of the tab.
Enables SD Preset Matrix.
69
Menus