Required Tools And Equipment; Table 2-4 Tool And Equipment Requirements Checklist - Cisco 6260 Installation Manual

Required Tools and Equipment

2.3 Required Tools and Equipment
Table 2-4
system components as detailed in
Splitter Configuration,"
Splitter Configuration."
Table 2-4
components as detailed in
Table 2-4
Check
Hardware Components
Software Components
Tools
Cisco 6260 Hardware Installation Guide
2-16
lists the tools and equipment you need to install and connect the Cisco 6260
Chapter 3, "Installing a Cisco 6260 with a POTS
and Chapter 4, "Installing a Cisco 6260 Without a POTS
also lists the tools and equipment you need to remove and install the Cisco 6260 system
Chapter 6, "Upgrading and Maintaining the Cisco 6260 System."
Tool and Equipment Requirements Checklist
Tools and Equipment
Cisco 6260 chassis
Line cards (if not already installed in the Cisco 6260 chassis)
4xDMT
•
4xDMT over ISDN
•
4xflexi
•
4xSDSL
•
8xDMT
•
8xDMT over ISDN
•
• 8xG.SHDSL
NI-2 card(s) (if not already installed in the Cisco 6260 chassis)
DS3/2DS3
•
DS3+T1/E1 IMA
•
1
OC-3c/OC-3c SMF
•
I/O module (if not already installed in the Cisco 6260 chassis)
E3
•
E1
•
OC-3c
•
Blank faceplates
Fan trays (if not already installed in the Cisco 6260 chassis)
PEMs (if not already installed in the Cisco 6260 chassis)
Champ cables
Third-party vendor POTS splitter
Cisco IOS
•
4
• CDM
A 3/16-inch flat-head screwdriver
A Phillips-head screwdriver
2
or MMF
3
Chapter 2 Preparing for Installation
OL-2365-02