Appendix; Connector And Pinout Specifications; Xdsl Connectors; I/O Module Connectors - Cisco 6260 Installation Manual

Connector and Pinout Specifications

This appendix provides information about connectors and pinouts for configuration of the
Cisco 6260 system.
C.1 xDSL Connectors
Ten female RJ-21 (Champ) subscriber connectors are located at the top of the Cisco 6260 chassis, facing
forward. These 50-pin sockets provide the DSL subscriber connections. Each subscriber connector serves
three line card slots. This connection can be made by either of the following methods:
•
•
Figure C-1
for all Champ connectors.
Figure C-1
C.2 I/O Module Connectors
This section provides information about the external interface connectors for the Cisco 6260 I/O module.
OL-2365-02
Through a POTS splitter for voice and data applications (Cisco 6260 with a POTS
splitter configuration)
Directly for data only applications (Cisco 6260 without a POTS splitter configuration)
shows connector pin locations for the xDSL Champ connectors. Pin locations are the same
xDSL Connector Pin Locations
25
50
A P P E N D I X
1
26
Cisco 6260 Hardware Installation Guide
C
C-1