Table of Contents
Advertisement
Cisco 6260 System Overview
1.2.3.6.1 Faceplate Features
Figure 1-13
Figure 1-13 8xDMT Over ISDN Faceplate
1
2
3
4
5
6
1
2
3
Table 1-7
Table 1-8
LED
STATUS
ACTIVE
ATU-C 1
Cisco 6260 Hardware Installation Guide
1-24
shows a close-up of the 8xDMT over ISDN faceplate.
STATUS
ACTIVE
ATU-C1
ATU-C2
ATU-C3
ATU-C4
ATU-C5
ATU-C6
ATU-C7
ATU-C8
ATUC-8-
DMT-I
Ejector lever
Locking tab
STATUS LED
describes LEDs on the 8xDMT over ISDN.
8xDMT over ISDN LED Indicators
State
Green slow blinking
Green solid
Red
Off
Green solid
Off
Green solid
Green blinking
Off
4
ACTIVE LED
5
Modem port status LEDs
6
Extraction tab
Function
No errors, but no connection established.
The image download is in progress.
NI-2 communication established.
The self-test or line card has failed.
The ATU-C line card has had a power failure.
The line card is activated.
The line card is not in service.
Modem 1 is trained.
Training is in progress for modem 1.
Modem 1 is idle.
Chapter 1
Product Overview
OL-2365-02
Advertisement
Table of Contents
