Table of Contents
Advertisement
Preface
This preface explains the audience, purpose, and organization of the Cisco 6260 Hardware Installation
Guide. It also defines the conventions that are used to present instructions and information.
Audience
The Cisco 6260 Hardware Installation Guide is intended for use by central office (CO) technicians and
maintenance personnel who are responsible for installing, configuring, and maintaining the Cisco 6260
system. A familiarity with telco products and networking systems is recommended.
Purpose
The Cisco 6260 Hardware Installation Guide describes how to set up, install, and troubleshoot the
Cisco 6260 system. After completing the installation procedures covered in this guide, refer to the
appropriate related documents to provision your Cisco 6260 system. For additional information on
related documentation, see the
Organization
The Cisco 6260 Hardware Installation Guide is organized as follows:
•
•
•
•
•
•
OL-2365-02
Chapter 1, "Product Overview,"
hardware components.
Chapter 2, "Preparing for Installation,"
installation of the Cisco 6260 system.
Chapter 3, "Installing a Cisco 6260 with a POTS Splitter Configuration,"
procedures for a Cisco 6260 system with a POTS splitter configuration.
Chapter 4, "Installing a Cisco 6260 Without a POTS Splitter Configuration,"
procedures for a Cisco 6260 system without a POTS splitter configuration.
Chapter 5, "Troubleshooting,"
conditions in the Cisco 6260.
Chapter 6, "Upgrading and Maintaining the Cisco 6260 System,"
and installing system components, as well as information on maintaining the Cisco 6260 system.
"Related Documentation" section on page
provides an overview of the Cisco 6260 and describes the system
provides the requirements necessary to prepare for the
provides troubleshooting procedures for hardware and software
xv.
provides installation
provides installation
provides procedures for removing
Cisco 6260 Hardware Installation Guide
xiii
Advertisement
Table of Contents
