Figure 1-11 4Xsdsl Faceplate; Table 1-6 4Xsdsl Led Indicators - Cisco 6260 Installation Manual

Hide thumbs Also See for 6260:
Table of Contents

Advertisement

Cisco 6260 System Overview
The edge connector key, located on the rear of the 4xSDSL, connects the 4xSDSL to the backplane of
the chassis. Two edge connector keys are available for the 4xSDSL: one has six notches, and one has
seven notches. Only the seven-notched edge connector key can be installed in the Cisco 6260.
1.2.3.4.1 Faceplate Features
Figure 1-11

Figure 1-11 4xSDSL Faceplate

1
2
3
4
5
6
1
2
3
Table 1-6
Table 1-6
LED
STATUS
ACTIVE
Cisco 6260 Hardware Installation Guide
1-20
shows a close-up of the 4xSDSL faceplate.
STATUS
ACTIVE
STU-C 1
STU-C 2
STU-C 3
STU-C 4
4X SDSL
2B1Q
Ejector lever
Locking tab
STATUS LED
describes the 4xSDSL LED indicator functions.
4xSDSL LED Indicators
State
Green slow blinking
Green fast blinking
Green solid
Red
Off
Green solid
Off
4
ACTIVE LED
5
Modem port status LEDs
6
Extraction tab
Function
The self-test is in progress.
The image download is in progress.
The status is OK.
The self-test or line card has failed.
The ATU-C line card has had a power failure.
The line card is activated.
The line card is not in service.
Chapter 1
Product Overview
OL-2365-02

Advertisement

Table of Contents
loading

Table of Contents