Table of Contents
Advertisement
Hardware Specifications
A.1.1 Cisco 6260 Chassis
Table A-1
Table A-1
Cisco 6260 Hardware Specifications
Specification
Dimensions
Weight
Network interface
ADSL interface
SDSL interface
SHDSL interface
Craft interface
Management access
External alarm contacts
Power requirements
CO operating
Temperature
requirements
Altitude
Humidity
Operating shock
Nonoperating shock
Maximum heat dissipation for a fully
loaded chassis
Cisco 6260 Hardware Installation Guide
A-2
lists the hardware specifications of the Cisco 6260 system.
Description
13.43 RUs—23.5 in. x 17.5 in. x 11.0 in. (59.7 cm x 44.5 cm x 28.0 cm)
Empty—Approximately 37.5 lb (17.0 kg)
Loaded—Approximately 80 lb (36.3 kg)
ATM OC-3c (single- or multimode fiber), ATM E3, ATM E1
When the DS3/2DS3 NI-2 card is installed in the Cisco 6260
Note
chassis, it assumes E3 functionality.
DMT—Up to 8.032 Mbps downstream/864 kbps upstream
G.lite—Up to 1.536 Mbps downstream/512 kbps upstream
2B1Q—Up to 1168 kbps upstream and downstream
TC-PAM
Console terminal connection on the NI-2 card
RJ-45 interface for craft alarm discovery
•
RJ-45 Ethernet
•
ATM in-band management
•
Single dry contact alarm input (NO)
–40.5 VDC to –75 VDC
•
Note
See
power requirements.
41º to 104ºF (5º to 40ºC)—Operating
23º to 131ºF (–5º to 55ºC)—Short-term operating
0 to 10,000 feet (0 to 3048 meters)—Operating
0 to 30,000 feet (0 to 9144 meters)—Nonoperating
5 to 95% (noncondensing)
5 to 500 Hz, 0.5 gravity (0.1 octave per minute)
5 to 100 Hz, 1 gravity (0.1 octave per minute);
100 to 500 Hz, 1.5 gravities (0.2 octave per minute);
500 to 1000 Hz, 1.5 gravities (0.2 octave per minute)
4097 BTUs/hour
1
Chapter 2, "Preparing for Installation,"
Appendix A
Technical Specifications
for detailed
OL-2365-02
Advertisement
Table of Contents
