Flash - Pbx Line - Comdial DX-80 Installation And Maintenance Manual

•
Input 03-02, then press [
chg chg chg chg
•
Press [ ] until the appropriate CO Line hook-flash timing displays.
•
the Hold button
Press
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
Press until the appropriate CO Line hook-flash timing displays.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Flash – PBX Line
Flash – PBX Line is a programmed setting that will determine what flash timing will be presented to the host
telephone system when the DX-80 is installed as a subordinate system. This feature is critical to perform accurate
host-system functions like PBX call transfer. When used "behind" a PBX, the DX-80 system extensions should have
the Flash feature code programmed onto a Flexible Feature Button for easy access.
Related Features
Speed Dial (System and Station)
Last Number Redial
Related Programming
Call Handling – PBX Flash Time
P7290 IMM
DX-80 I
NSTALLATION AND
save save save save
]. This advances to CO FLASH programming.
to return to the previous menu level or press
to highlight "Call Handling." Then press
to highlight "Category 1." Then press
to highlight "CO Flash."
M M
AINTENANCE ANUAL
the Volume button (up or down)
«
.
«
.
«
.
°
(escape) key to exit this database programming
Memo Pad
Automatic Redial
3-142
to
!3