Transfer And Answer Call - Comdial DX-80 Installation And Maintenance Manual

Or...
•
Input 03-11, then press [
chg chg
chg chg
•
Press [ ] until the appropriate value for this data item displays.
next next
next next
•
Press [ ] to advance to the next data item or exit programming.
•
the Hold button
Press
•
Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
Program extensions into the tenant group:
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
Press until the appropriate value displays.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Transfer and Answer Call

Transfer and Answer is a convenience feature that speeds the process of completing a transfer and answering a
ringing call by making the operation possible by one button. (This feature must be used from a feature button that has
been designated for the purpose.)
When a busy extension user (secretary or attendant) is in the process of transferring a call and another call rings in,
the Transfer/Answer button can be pressed to complete the transfer and answer the ringing call at the same time.
Related Features
Transfer
P7290 IMM
DX-80 I
NSTALLATION AND
save save save save
]. This advances to the Transfer-Busy Recall programming screen.
to exit DISA programming and return to the previous menu level.
to highlight "Call Handling" and then press
to highlight "Category 1" and then press
to highlight "XFR_I Recall" or "XFR_B Recall" as necessary for change.
°
(escape) key to exit this database programming screen. You will
M M
AINTENANCE ANUAL
«
.
«
.
«
.
Flexible Feature Button Programming
3-236
!68