Modem (Optional Mdm) - Comdial DX-80 Installation And Maintenance Manual

Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
•
Input the message and then press
•
Continue making other programming changes as required.
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Modem (Optional MDM)

The DX-80 system can be equipped with an optional internal modem for DX-80 Remote PC-DBA Programming
support. When equipped, the Modem Module provides a dedicated communications path between the system
processor and PC-DBA. This communications path does not require use of analog port system resources.
Related Features
Database Administration via PC-DBA
Related Programming
System Resource - Modem and Serial Port
Conditions
Modem speeds are 1200 bps/ 2400 bps.
Default Settings
System Resource – Built-in Modem – DIR. No. (directory number) is set to "199."
System Resource – Built-in Modem – Baud Rate is set to "2400."
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "System Application" and then press
to highlight "System Resource" and then press
to highlight "Preprogrammed Message" and then press
to highlight the message to be changed. Then press
«
to temporarily store this data.
°
(escape) key to exit this database-programming screen. You will
M M
AINTENANCE ANUAL
«
.
«
.
«
.
«
3-182
«
.
.