Dss (Direct Station Selection Terminal) - Comdial DX-80 Installation And Maintenance Manual

Hide thumbs Also See for DX-80:
Table of Contents

Advertisement

The display provides a visual reference to call progress and call duration, as well as time and date
information. The display also enables the user to send and receive visual advisory and callback messages.
Users may select from six "canned" messages (i.e., "IN A MEETING," "OUT OF OFFICE"), or they may
create a custom message. Calls from other DX-80 telephone users to an extension with a message active
will receive the visual advisory message on their LCD display.
Each digital speakerphone has thirty (30) Programmable Feature Buttons to aid the user by providing direct
access to system features and resources. There are also three (3) Interactive Buttons and 8† fixed function
buttons. (†Note: the Volume Button Bar represents two operations; volume up and volume down.)
Each Digital Executive Telephone is equipped standard with a 2.5 millimeter headset jack. The user may
toggle his speakerphone operation into an out of a special "Headset Mode". This mode allows the user to
easily activate the headset jack via the ON/OFF button as an alternative to using the speakerphone.
Headset mode is easily enabled or disabled so that the user may quickly select between use of the headset
or speakerphone operations. (Must be idle to change this setting.)
Each speakerphone is also equipped with a Status Lamp to aid in user operations. The lamp is dual color
(red / green) and indicates various modes of operation. (Messages / Voice Messages Waiting, Incoming
calls - distinctive for CO and intercom, in-use indication for speakerphone mode and headset mode, and
others.)

DSS (Direct Station Selection Terminal)

The DSS Console is a digitally interfaced component of the DX-80. It connects to the system via any
available digital port (408M/E or DPM8 digital port). The DSS is equipped with 60 Programmable Buttons. 12
of these buttons are intended for features code storage only and do not have LED indications associated
with them. 48 buttons are equipped with dual color (red / green) LEDs and may be assigned any system
Feature Code or Directory Number. (These buttons may be assigned for either system features operations
or CO line access operations.)
The DSS Console may be mounted in two positions (Lower Profile Desk Position and Wall Mounted
Position). DSS Consoles are programmed to operate with an associated speakerphone. Speakerphones
P7290 IMM
DX-80 I
M
NSTALLATION AND
AINTENANCE
Figure 8: DET (Digital Extension Terminal)
1-12
M
ANUAL

Advertisement

Table of Contents
loading

Table of Contents