Extension Password - Comdial DX-80 Installation And Maintenance Manual

Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Extension Password

All extensions of the DX-80 system have an associated User Password. Passwords are used to facilitate Phone
Lock, Call Forward Remote and Attendant features. Password length is system programmable from four to eight
characters.
Related Features
Call Forward – Extension (Remote)
Phone Lock/Unlock
Attendant Administration
Related Programming
System Resource - User Password - Length
System Resource - User Password - Password
Operation
Refer to the specific feature for operation.
Default Settings
System Resource – User Password: Extension 101 is set to "9999," All other extensions are set to "0000."
(Range is: any alphanumeric characters up to the allocated User Password Length.)
System Resource – User Password – Length is set to "4." (Range is: 4-8.)
Programming Abstract
•
Program the User Password Length. (Note: Changes to the length of the User Password affect the existing
programmed passwords by adding or subtracting one default character to the end of the existing password.
When the length of the User Password is extended, all passwords increase by one character, and when the
length of the User Password is reduced, all passwords decrease by one character.)
•
Program the passwords for each extension.
Programming via the DET (Digital Extension Terminal)
back back next next
back back next next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show show
show show
•
Press [ ]. The DB Item Select screen displays.
Program User Password Length
•
Input 04-04-01, then press [
chg chg chg chg
•
Press [ ] until the appropriate Extension Password Length displays (valid lengths 4-8).
next next
next next
•
Press [ ] to advance to the Extension password view screen.
•
Input the extension number to change (e.g., 101)
save save save save
•
Press [ ]. The Password for the extension entered displays.
back back back back next next next next
•
Press [ ] or [
view other extension passwords.
P7290 IMM
DX-80 I
NSTALLATION AND
show show chg chg bksp bksp
show show chg chg bksp bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save save save save
]. The current User Password Length displays.
] to return to the extension number input screen and repeat the above operations to
3-121
M M
AINTENANCE ANUAL
Caller ID - Call Table
Direct Inward System Access (DISA)
save save
save save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password