Hotel Mode - Alarm Clock Extension; Room Status - Comdial DX-80 Installation And Maintenance Manual

Related Features
Intercom calling
Operation – Disable
While the telephone is idle, press
invoked:
Operation – Enable
While the telephone is idle, press
invoked:
Default Setting
Hot Key is enabled.
Hotel Mode – Alarm Clock Extension

– Room Status

Hotel Mode can be enabled in the system programming. This feature allows the system attendant to administer
certain system extension features to emulate hotel operations.
The system attendant can:
Set extension wakeup calls via the Alarm Clock-Extension feature.
Set extension status to Checked IN, Checked OUT and Clean such that the associated LED of DSS/BLF buttons for
the extension indicate the current status. In "Checked Out" and "Clean" modes, dialing at the extension is restricted to
intercom calls only.
Related Features
Extension Password – Attendant
Related Programming
System Resource – Attendant
Call Handling – Hotel Enable
Operation – Wake Up Calls (via Alarm Clock Extension)
1. While the Attendant extension is idle, press
2. Input the extension for which the Wakeup call is to be set. Then press [
chg chg chg chg
3. Press [ ].
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
!/6
. The display will momentarily show the feature status
HOT KEY DISABLED
!/6
. The display will momentarily show the feature status
HOT KEY ENABLED
!92
EXTENSION :_
bksp show chg
ALARM TIME:NULL
chg
3-162
M
ANUAL
All "dial-access" features
Alarm Clock - Extension
. The display shows:
show show show show
].
!92
!7/