Last Number Redial - Comdial DX-80 Installation And Maintenance Manual

Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu.
¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
Press until the appropriate value displays.
¢£¤¥
•
Use
«
•
.
Press Each time that enter is pressed the value of this database item is updated.
¢£¤¥
•
Use
«
•
Press until the appropriate value displays
•
When all changes are made press the
see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Last Number Redial

The Last Number Redial (LNR) feature automatically dials the last number dialed from your telephone. The LNR
retains sixteen (16) digits for each extension.
Related Features
Automatic Redial
Related Programming
Call Handling - Dial Wait Time, Dial Delay Time, Dial Tone Detect
Operation
You may either choose a specific CO line for use with LNR by first pressing that CO line button or you may allow
the line to be selected automatically by the LNR feature.
1. Allow the system to select a CO Line and automatically dial:
!8
Press . The previously dialed number is dialed on the CO Line selected by the system.
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "Extension" and then press
to highlight "Intrusion Active" for the Extension to be changed.
to highlight "Intrusion Accept" for the Extension to be changed.
to "Intrusion Tone" for the Extension to be changed.
°
(escape) key to exit this database programming screen. You will
M M
AINTENANCE ANUAL
«
.
.
Memo Pad
3-171
!8