Extension Programming Copy - Comdial DX-80 Installation And Maintenance Manual

•
the Hold button
Press
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use ,
«
•
.
Press Each time that enter is pressed the value of this database item is updated.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Extension Programming Copy

This database feature is used to copy the various extension programming settings quickly from one extension to
other extensions. There are two methods to copy extension data to other extensions: 1) "individual" is used to copy
from the source extension to other extensions, one at a time; 2) "group" is used to copy from the source extension to
other extensions, using the Pick Up Group to identify the extensions that will receive the copy as a group.
Related Programming
System Application - Extension Copy, Feature Key Copy, CO Line Copy, DSS Copy
Conditions
a) The source extension must have all programming changes completed prior to invoking a copy.
b) When using Group Copy, all extensions to receive the copy must be programmed for the correct Pick Up
Group to associate them with other extensions to receive this copy.
Programming Abstract
Use Extension Programming Copy to copy the programmed settings of one extension to one other extension
or to a group of extensions.
P7290 IMM
DX-80 I
NSTALLATION AND
to return to the previous menu level or press
to highlight "Extension." Then press
to highlight "Category 1." Then press
³´
to highlight the database item "Pickup Group" for the Extension to be changed.
M M
AINTENANCE ANUAL
the Volume button (up or down)
«
.
«
.
«
.
°
(escape) key to exit this database programming
3-124
to