Enabling Simplex Audio; Using Audio Features With Simplex Audio Mode; Figure 8-3 Options For New Players Window - Honeywell Rapid Eye Operator's Manual

Enabling Simplex Audio

Using Audio Features with Simplex Audio Mode

Document 800-02951V3 Rev A
11/09
1. The simplex audio mode can be enabled/disabled from the New Players Options
window in the View application.
2. Select the View menu
Audio mode will be enabled (checked).
Figure 8-3 Options for New Players Window
To use audio features with the Simplex audio mode enabled:
1. Open a Live session by selecting a site and clicking Live (
window, notice that the listen streams are ON by default.
2. To talk on channel 1 (for example broadcasting an audio on channel 1), click and hold
the channel 1 Talk button (
and the listen buttons will be greyed out. That is, the user will not be able to listen to
any of the channels while the channel 1 Talk button is pressed down.
3. To stop talking on channel 1 (stop broadcasting audio on channel 1), release the
channel 1 Talk button (
the listen buttons will be enabled. The user can now listen to both the channels but
cannot talk on any of the channels.
Note There should be a 1 second delay between clicking the two Talk buttons. That
is, after releasing one of the Talk buttons, the user has to wait 1 second
before they click the next Talk button. If the user clicks the Talk button without
waiting 1 second, the talk stream will not be enabled.
Rapid Eye Remote View Operator Guide
Options New Players window. By default, the Simplex
). The listen streams will automatically be toggled OFF
). The listen streams will automatically be toggled ON and
). On the Live
113