Live Video
Selecting
Preset, Tour,
and Vector
determines the
effect of the
numbered
buttons (1–8)
PTZ Tours and PTZ Vectors
Privacy Zones
46
3.
Choose a PTZ preset. The PTZ camera goes to the PTZ settings of the preset. If the
camera does not move, either:
•
A preset has not been set for that number.
•
The camera is already in the preset position.
•
The selected camera is not a PTZ camera.
Figure 2-16
Using PTZ Presets
Number of Presets Available
Not all makes and models of PTZ cameras offer presets, or the same number of presets.
View lists the number of presets available for a camera connected to the unit. If a camera
model offers four presets, buttons #5 to #8 are unavailable on the PTZ dartboard control.
Listing PTZ Presets 9 to 128
1.
Using the PTZ controller, leave or set Preset in the box near the top of the controller.
2.
Click the double-arrow button next to the button for PTZ preset #8. A list of the rest of
the presets appears. Click the double-arrow button again to close the list.
3.
Select a preset. Available preset numbers depend on the make and model of the PTZ
camera. The PTZ camera goes to the PTZ settings in the preset.
PTZ tours and vectors are set by your organization's Multi SA. They can be used by a
Multi-Media operator in the same way as PTZ presets. See
Camera, page 45, and select Tours or Vectors, as needed.
On RapidDome models, presets 100 to 127 can be designated as privacy zones. Video is
not displayed when a dome is placed in a privacy zone position. Privacy zones are setup
by your Multi SA.
Choosing a Preset for a PTZ