Controlling A Ptz Camera Using The Dartboard; Figure 2-15 Ptz Dartboard Control Commands - Honeywell Rapid Eye Operator's Manual

Live Video

Controlling a PTZ Camera Using the Dartboard

44
2. Click , the Enable PTZ Control button. A dartboard control appears (as in
Figure 2-14).
• The title bar in the dartboard control shows the name of the camera and adds
PTZ (see Figure 2-14).
• The PTZ tip shows what the active area of the controller does (see
For a reminder of what an area of the dartboard can do, watch the PTZ tip as you surf the
dartboard with the mouse pointer (see
• Click. The duration of PTZ commands is fixed and depends on the inner ring that is
chosen. Watch the PTZ tips change as the mouse pointer surfs the dartboard.
• Hold. PTZ commands last as long as the mouse button is held.
• Speed. Clicking the inner circle of the PTZ controller cycles the control speed through
Slow, Medium, Fast, back to Slow, and so on. In Click style, the Speed setting
changes the duration of commands. In Hold style, the setting changes the speed of
the camera's response to commands.
1. On the PTZ Control, the Click button is selected by default when the control appears
(see Figure 2-14 or Figure
the Hold option, holding the mouse button down makes the command last as long as
it's needed.
2. Move the mouse pointer over the dartboard to highlight areas of the dartboard. Each
area on the dartboard offers a PTZ tip in the box below the controls. When the
command that you need is highlighted, click the mouse button (see
the mouse pointer is not on the dartboard, no PTZ tip is shown. If auto-iris is not
supported, only one black dot appears in the arc for Iris on the dartboard.
Figure 2-15 PTZ Dartboard Control Commands
Zoom arc
Continuous
panning
Pan
Iris arc
Auto-iris
PTZ tip
Figure 2-15).
2-15). You have the option of clicking the Hold button. With
Focus arc
Figure
Figure 2-15). If
Speed
2-14).