Site Tour Properties; Stopping A Site Tour; Pausing A Site Tour; Figure 9-4 Site Tour Properties Dialog - Honeywell Rapid Eye Operator's Manual

Site Tour Properties

Stopping a Site Tour

Pausing a Site Tour

Document 800-02951V3 Rev A
11/09
You can display properties of the site tour such as the sites to be visited and the duration
of each visit. These properties reflect the site tour settings made using the Admin
application. See your Multi SA to setup or modify a site tour.
Do one of the following:
• Select a site tour on the Tours tab and click
• Right-click on a site tour and select Properties.
• Site Tour properties.
Figure 9-4 Site Tour Properties Dialog
While viewing camera images when conducting a site tour, you can temporarily suspend
the site tour. For example, if a robbery is in progress at one of the monitored sites, you can
suspend the site tour until the event is resolved. Then, you can resume the site tour to
continue to monitor other sites.
Once you resume, the site will be connected for the full duration time as specified for that
tour in the Admin application.
Click in the Player Window toolbar or select Suspend Tour in the File menu. Only the
time duration of the site tour is suspended. The live video retrieval of the site is not affected.
Rapid Eye Remote View Operator Guide
on the toolbar.
117