Searching For Data; Figure 12-2 Search For Data Session - Honeywell Rapid Eye Operator's Manual

Searching for Data

Click Start
to generate
a list of
results.
Document 800-02951V3 Rev A
11/09
Preparation
Before searching for customer events:
• Data devices need to be connected and assigned to a serial port on a Rapid Eye unit.
• A View operator needs to know how to identify the rule (string of text) of the event.
Purpose
View can be used to search for messages from non-Multi hardware devices/systems such
as: cash registers, door access sensors, a guest registration system, and so on. Recorded
video can be obtained from the time of the message.
be used to search for rules. Regular expressions are listed in
These techniques are a powerful asset to surveillance technology.
Devices connected to the unit (for example, a cash register) are listed automatically.
1. Enter the data to be searched for and a date/time range.
2. Click Start.
3. Video from a result can be obtained by selecting a result and clicking Video.
Figure 12-2 Search for Data Session
Rapid Eye Remote View Operator Guide
Regular Expressions, page
Table 12-1 on
136, can
page 136.
Select the POS
data to search
for and the time
and date range
to search in.
Select a result
and click Video
to view video of
the time the data
was captured.
133