Ptz Pull Mode And Rubber Band Control; Figure 2-12 Dragging The Mouse Pointer To Control A Ptz Camera - Honeywell Rapid Eye Operator's Manual

Live Video

PTZ Pull Mode and Rubber Band Control

42
Temporarily and for One Session
1. In a Live player, select a PTZ camera.
2. In the View menu, select Options.
3. Click the Zonal PTZ Control Mode option.
• If there is no checkmark next to the option, Zonal mode is enabled and replaces
the rubber band-like control (Pull Mode).
• If there is a checkmark next to the Zonal PTZ Control Mode option, Zonal mode
is replaced by the rubber band control (Pull Mode).
Figure 2-12 Dragging the Mouse Pointer to Control a PTZ Camera
Pan / Tilt. On the video image, click and drag the mouse. A line is overlaid on the video.
Pull the line around to indicate the direction you to pan or tilt the camera.
the pointer dragged from left to right. Lengthening the line speeds-up the PTZ camera's
panning or tilting. Release the mouse button to stop the camera. If you do not see a
rubber-band-like control, the View application may be set for Zonal Mode. See
Mode on page 43.
Zoom. You have the option of using the wheel on the mouse to Zoom in and out, when the
mouse pointer is on a PTZ camera window.
The line drawn by dragging the mouse in a PTZ camera window can be customized: None,
Thin, Regular, and Thick. The line's color can also be changed (see
Figure 2-12 shows
Using Zonal
Figure 2-11).