General Instructions - Moog Videolarm IP Ready IFDW75CN Product Instructions

ifDW75Cn, ifDP75Cn
iP Ready network housing
IP Ready Network Housing with wall mount or pendant
mounting, ready for standard IP PTZ cameras.
ElECtRiCal sPECifiCations (inDooR onlY):
!
Power 24Vac, Class 2 Only
Total Power: 52 watts
Camera Power: 52 watts MAX
notE: This unit is designed for operation in an
upright position. Installing the housing
upside down may cause damage to
the internal equipment, and will void the
warranty.

GEnERal instRuCtions:

Tools Required: .100" Flat Head Screwdriver
Phillips Head Screwdriver
Be sure the bracket is properly and securely mounted
!
to a supporting structure capable of rigidly holding
the weight of the entire unit.
assEMBlinG thE unit:
1. Remove content from all boxes.
Contents should include:
Main housing assembly
Either with wall mount or pendant bracket
Dome assembly - Clear or tinted
Do not remove the protective film until the product is
assembled and installed.
3 Packet assemblies
- 3 -