1. Manuals
  2. Brands
  3. Moog Videolarm Manuals
  4. Security Camera
  5. IP Ready IFDW75CN
  6. Product instructions

Moog Videolarm IP Ready IFDW75CN Product Instructions

Ip ready series
Hide thumbs Also See for IP Ready IFDW75CN:
Table of Contents

Advertisement

Quick Links

Download this manual
Product
Instructions
IP Ready
Series
™
IFDW75CN & IFDP75CN
Before attempting to connect or operate this product,
please read these instructions completely.
81-IN5367
08/10/07
-  -

Advertisement

Table of Contents
loading

Related Manuals for Moog Videolarm IP Ready IFDW75CN

Summary of Contents for Moog Videolarm IP Ready IFDW75CN

  • Page 1 Product Instructions IP Ready Series ™ IFDW75CN & IFDP75CN Before attempting to connect or operate this product, please read these instructions completely. 81-IN5367 08/10/07 -  -...
  • Page 2 iMPoRtant safEGuaRDs safEtY PRECautions . Read Instructions - All the safety and operating instructions should be read before the unit is operated. Caution . Retain Instructions - The safety and operating instructions should be retained Risk of for future reference. ElECtRiC shoCk! 3.

  • Page 3: General Instructions

    Ready network housing 1. Remove content from all boxes. IP Ready Network Housing with wall mount or pendant Contents should include: mounting, ready for standard IP PTZ cameras. ElECtRiCal sPECifiCations (inDooR onlY): Power 24Vac, Class 2 Only...

  • Page 4: Table Of Contents

    35x high-powered zoom is requried, Videolarm has developed four special models of its FusionDome which incorporate an enhanced optically clear acrylic dome: FDW75C2N/AC, FDP75C2N/AC, IFDW75CN/AC, IFDP75CN/AC. For further information on these products and the compatibiilty of the Axis 233D camera system, please contact a Videolarm representative at (800) 554-1124.

  • Page 5: Axis 213

    installinG QuiCk RElEasE BRaCkEts AXIS 213 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.

  • Page 6: Axis 214

    installinG QuiCk RElEasE BRaCkEts AXIS 214 2685 Mounting Plate: Attach camera using these (3) holes 2" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.

  • Page 7: Axis 231D/232D

    installinG QuiCk RElEasE BRaCkEts AXIS 231D/232D 2685 Mounting Plate: Loosen screw Attach camera using these (3) holes 3. Position the locking pins and locking screw over the key hole slots and twist clockwise. Secure locking screw. Keyhole slot (3) Locking screw 4.
  • Page 8 installing the axis 231D/232D Camera (cont.) 7. Housing with 2685 mounting plate installed. 10. Locate the connector block, which is included 8. Since the 231D/232D camera operates on 24vac, the power with the camera. Then board that is located inside the housing is not needed. The locate the connector remove the power board, start by loosening the screws block bracket, which...
  • Page 9 installing the axis 231D/232D Camera (cont.) 13. To manage the input cable running from the connector block to the camera use the (2) cable tie mounts and cable ties that are located in the housing packet. Cable Tie Mounts 12. Make wiring connections to connector block assembly per camera instructions.

  • Page 10: Canon Vb-C10R

    installinG QuiCk RElEasE BRaCkEts CANON VB-C10R 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.

  • Page 11: Canon Vb-C50Ir

    installinG QuiCk RElEasE BRaCkEts CANON VB-C50iR 2539 Mounting Plate: Attach camera using these (2) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.

  • Page 12: Canon Vc-C4R / Vc-C50Ir

    installinG QuiCk RElEasE BRaCkEts CANON VC-C4R / VC-C50iR 2539 Mounting Plate: Attach camera using these (2) holes 1" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.

  • Page 13: Elmo Ptc-200C

    installinG QuiCk RElEasE BRaCkEts ELMO PTC-200C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 1" 2. The Elmo PTC-200C camera requires 3.5" of spacing for optimal position within the housing.

  • Page 14: Elmo Ptc-201

    installinG QuiCk RElEasE BRaCkEts ELMO PTC-201 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 2. The Elmo PTC-201 camera requires 2½" of spacing for optimal position within the housing.

  • Page 15: Elmo Ptc-400C

    installinG QuiCk RElEasE BRaCkEts ELMO PTC-400C Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes ½" 1" 2. The Elmo PTC-400C camera requires 3.5" of spacing for optimal position within the housing.

  • Page 16: Elmo Ptc-401

    installinG QuiCk RElEasE BRaCkEts ELMO PTC-401 Mounting plate for this unit is included in the housing packet. Remove existing mounting plate installed in the unit before proceeding. 2539 Mounting Plate: Attach camera using these (4) holes 1" 2. In the packet, there will be a number of 2 inch and 1 inch spacers.

  • Page 17: Jvc Vn-C30U

    installinG QuiCk RElEasE BRaCkEts JVC VN-C30U 2539 Mounting Plate: Attach camera using these (3) holes ½" 2. In the packet, there will be a number of 2 inch and ½ inch spacers. Take four of the ½ inch spacers and screw them onto the spacers that are on the base 2"...

  • Page 18: Jvc Vn-C625U / Tk-625U

    installinG QuiCk RElEasE BRaCkEts JVC VN-C625U / TK-625U 1" 1" 3. The JVC VN-C625U / TK-625U requires a total of 2” of spacing to properly position the camera within the housing. 1. Remove plastic cover (1 screw). 4. Attach (4) 1” spacers to the 2630 mounting plate in the position shown.

  • Page 19: Jvc Vn-C655U

    installinG QuiCk RElEasE BRaCkEts JVC VN-C655U 2630 Mounting Plate: Attach camera using these (4) holes 1. Place the camera onto the quick release bracket using ½" the (4) metric 3M Phillips head screws provided with the kit. 1" 2. The JVC VN-C655U requires 1 ½ “ to properly position the camera within the housing.

  • Page 20: Panasonic Bb-Hcm381/580/581 & Kx-Hmc280

    installinG QuiCk RElEasE BRaCkEts PANASONIC BB-HCM381/580/581 & KX-HMC280 2539 Mounting Plate: Attach camera using this hole ½" 1" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.

  • Page 21: Pixord 261 / 262

    installinG QuiCk RElEasE BRaCkEts PIXORD 261 / 262 2630 Mounting Plate: Attach camera using these (3) holes ½" 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above. Be sure to place the screws so that they line up with the open slots on the mounting plate.

  • Page 22: Sony Sncrz25

    installinG QuiCk RElEasE BRaCkEts SONY SNCRZ25 2539 Mounting Plate: Attach camera using these (3) holes 1" 2. The SNCRZ25 require 1” of spacing to properly position the camera in the housing. Use (4) 1” spacers provided in the hardware packet. 3.

  • Page 23: Sony Sncrz30

    installinG QuiCk RElEasE BRaCkEts SONY SNCRZ30 2539 Mounting Plate: Attach camera using this hole 2" 2. The SNCRZ30 require 2” of spacing to properly position the camera within the housing. Use (4) 2” spacers provided in the hardware packets. 3. Place (3) 8 x 32 x s Phillips head screws on the top of the spacer as shown above.

  • Page 24: Sony Sncrz50

    installinG QuiCk RElEasE BRaCkEts SONY SNCRZ50 2539 Mounting Plate: Attach camera using this hole ½" 2" 2. The SONY SNCRZ50 require 2 ½ ” of spacing to properly position the camera within the housing. Use (4) 2” spacers plus (4) ½ “ spacers provided in the hardware packet.

  • Page 25: Toshiba Ik-Wb21A

    installinG QuiCk RElEasE BRaCkEts TOSHIBA IK-WB21A 2539 Mounting Plate: Attach camera using these (4) holes 1" 2" 2. The Toshiba 1K-WB21A requires 3” of spacing to properly position the camera within the housing. Use (4) 2” spacers plus (4) 1” spacers provided in the hardware packets.

  • Page 26: Installing The Housing Assembly

    installinG thE housinG assEMBlY: Be sure the bracket is properly and securely mounted to a supporting structure capable of rigidly holding the weight of the entire unit. notE: This unit is designed for operation in an 3. Mount the housing assembly to the mounting bracket upright position.
  • Page 27 installinG Wall Mount (cont.) ConnECtinG thE tRiM RinG assEMBlY to thE housinG toP: 3. Open the access door on the bottom of the wall mount by loosening the screw nearest the mounting plate. 1. Open the access door on the bottom of the wall mount by loosening the screw nearest the mounting plate.
  • Page 28 Exploded View for Replacement Parts Not included with INDOOR housings 1 1 1 - 8 -...
  • Page 29 Replacement Parts List Part Number Description RPFD750 LOWER TRIM RING FD7T TINTED REPLACEMENT CAPSULE FD7C CLEAR REPLACEMENT CAPSULE RPFD703 DOME CLAMPING BRACKET RPFD07 4 VAC HEATER RPFD080 ( VDC) BLOWER (USED IN 4V HOUSINGS) RPFD060 CAMERA BRACKET RPFD050 (MODEL FD7HB) CONNECTION PCB (4VAC ONLY) (NOT INCLUDED WITH INDOOR UNITS) RPFD040 HOUSING HARDWARE...
  • Page 30 Mounting Template R .733 2.132 5.500 1.537 2.981 2.000 3.250 - 30 -...

This manual is also suitable for:

Ip ready ifdp75cn

Table of Contents