Miscellaneous Programming; Program 1500 - Macro Key Sequence Programming - Sam4s ER-390M Operation And Program Manual

Miscellaneous Programming

Program 1500 - Macro Key Sequence Programming

Macros are special function keys that are used to execute a sequence of key depressions. For example,
a macro might be used to execute a string of reports or to automatically tender a preset amount. Up to
ten different macros may be placed on the keyboard. (See "Function Key Assignment Programming"
to place macros on the keyboard.)
To Program a Macro
1. Turn the control lock to the PGM-Mode.
2. To begin the program, enter 1 5 0 0, press the SBTL key.
3. Press the Macro key that you wish to program.
MACRO
4. First, you must change the Mode Key. Default Mode is PGM Mode.
Therefore, if you want to start in REG Mode, you must change Mode key to REG Mode.
Type up to 50 key stokes
5. Turn the control lock to the P position. Press the same Macro key to end the sequence
MACRO
6. Repeat from step 3 - 5 to program additional macros. Press the CASH key to finalize
the program.
To removing a Macro
If you wish to remove a keystroke from a macro, replace the current function with the
INACTIVE function.
ER-390M Electronic Cash Register AU
1 5 0 0
Ty pe up to 5 0 key strokes
CASH
SB TL
Program Mode Programming •155